Explore Activity:

This activity is just a "dummy" path activity, for those that do not know how to use the RE and get lost on the very confusing and complex, ADFRR 3.0 Route.

There is no AI traffic, and the player service uses MSTS default engines and rolling stock. If you want, change it.

Covers 95% of the route, taking anywhere from 9-10 hours to complete. Areas include North Fork Auto Plant, City of Nuggett, Marshall, and Saratoga, as well as the coal mines, mountain region, and street running in Riverside near the end of the route.

For further info on the route, download the guide (link above) I made for this fantastic route.

If you just want to explore the route without running into a dead end, or without taking the chance on thinking your done with it when in fact you have only touched the service, than this route is for you. If you want to do switching, and have meets with AI traffic, this activity is not for you.

Download - 11 KB
Downloads

Note: This activity will work on Ver. 4, however it does not cover any of the new trackage.

ADFRR Intermodel:

This activity covers the daily intermodel run from Riverside to Nuggett, a run that would normally take about 4 hours to complete, but today because of speed restrictions and a MOW window closing a portion of the line, it will take you about 5-6 hours.

Required Files:

adfrrge.zip
adfsd40.zip
dttx_pak.zip

All the above files can be found at the Train-Sim File Library.

Download - 28 KB
Downloads

Note: This activity will work on Ver. 4

ADFRR Railink Activities Parts 1, 2, & 3:

Marysville Marshall:

This activity is part I for the ADFRR Railink commuter train service, a fictional off spring of the ADFRR route by Robert Reedy.

Friday Early Bird Commuter:

This activity is part II for the ADFRR Railink commuter train service, a fictional off spring of the ADFRR route by Robert Reedy.

Friday Early Bird Commuter, modified to Riverside:

This activity is part III for the ADFRR Railink commuter train service, a fictional off spring of the ADFRR route by Robert Reedy.
It begins in Nuggett, and goes the length of the mainline to Riverside, on the recently added version 3 section.
It has 25 AI trains, and 27 stations to stop at.
The timetable is pretty flexible in most spots, but tight in others. Overall, should take just under 5 hours to complete.
This is a slightly modified part II, taking out the stop at Morlan Heights, adjusting the times for longer stops, doing away with the reverse to Bailey, which did not work correctly, and adding in the version 3 section, and the 10 new stops there.

Required Files:
(Be sure to read the "read me" for anything you DL)